
About this product
This high density polyethylene resin is an ethylene-hexene copolymer tailored for rotational molding applications that require:
Wide process windows
Excellent impact strength
Good flow
Good ESCR
Durability
This resin is available in two physical forms:
Pellet form - HMN TR-942
35 US mesh powder - HMN TR-942G
Typical applications for HMN TR-942 and HMN TR-942G include:
Potable water and chemical tanks
Agricultural equipment
This resin meets these specifications:
ASTM D4976 - PE 233
FDA 21 CFR 177.1520(c) 3.2a, - Use conditions B through H per 21 CFR 176.170(c) Table 2 for single use articles contacting food types I, II, IV-B, VI-A, VI-B, VII-B, and VIII. Repeated use articles contacting all food types defined in 21 CFR 176.170(c) Table 1. When contacting fatty foods of Types III, IV-A, V, VII-A, and IX described in Table 1, the finished articles are to have a volume of at least 18.9 liters (5 gallons).
FMVSS.302 burn test
NSF / ANSI Standard 61 for potable water (CLD 23)
Long term UV stabilization - ASTM 2565 (Cycle 1): Greater than UV-16
Markets and technologies
Specifications
No specifications are listed for this product
Related case studies
Use the button below to continue.
1900 Summit Tower Blvd
Suite #1500
Orlando, FL 32810
